Warm & Safe Heat-Trollers are true pulse-width modulating
controllers, famous for their high quality and reliability.
not an old-fashioned rheostat. Heat-Trollers cycle current on and off in
seconds, depending on the setting you choose. They do not heat up and
actually reduce amperage draw, on your electrical system, when turned
SPCOAX stands for Single Portable Coax controller,
'Single' means you will control your
heated gear as one single heat zone. For instance, gloves are connected
to the jacket sleeves and both jacket and gloves are controlled as one
single zone. In order to control gloves and jacket separately, you need
a dual controller (or two separate controllers).
because you will carry this controller on your body.
- 'Coax' means
it is setup to work with the round coax plug standard found in pretty
much all brands of heated clothing. Yes, you can use this controller
with your heated gear if it has a coax connector.
SAE, the flat 2 prong plug found on some battery chargers and older
heated gear, is an other widely used connector. We have an adapter
available to use this Coax controller with SAE gear or, if you want to
power this controller straight from your Battery Tender
SAE battery harness, we have an adapter for that too.
- Use PAC-038 to connect SAE clothing to a Heat-Troller or modern coax
- Use PAC-039 to connect a Heat-Troller to a Battery Tender battery harness
Size - 1.5" x 2.25" x .85" in or 38 mm
x 57 mm x 21.5 mm.
Comes with battery harness with covered fuse
Use this controller with heated liner, pants and gloves, with coax
connector, up to a maximum draw of 15 amps.
This model is intended to be portable (not permanently mounted on
A Belt Pouch is available.
Depending on availability, we ship either a Warm & Safe or
Powerlet branded product.