Warm & Safe Heat-Trollers are true pulse-width modulating
controllers, famous for their high quality and reliability.
not an old-fashioned rheostat. Heat-Trollers cycle current on and off in
seconds, depending on the setting you choose. They do not heat up and
actually reduce amperage draw, on your electrical system, when turned
SMCOAX stands for Single Mounted Coax controller,
- 'Single' means you will control your heated gear as one
single heat zone. For instance, gloves are connected to the jacket
sleeves and both jacket and gloves are controlled as one single zone. In
order to control gloves and jacket separately, you need a dual
controller (or two separate controllers).
- 'Mounted' meaning
it is designed to be permanently mounted on your bike. The control knob
and LED can be positioned anywhere on your bike. A small hole needs to
be drilled in a panel of your choosing.
- 'Coax' means it is
setup to work with the round coax plug standard found in pretty much all
brands of heated clothing. Yes, you can use this controller with your
heated gear if it has a coax connector.
SAE, the flat 2 prong plug found on some battery chargers and older
heated gear, is an other widely used connector. We have an adapter
available to use this Coax controller with SAE gear. Use PAC-038 to connect SAE clothing to a Heat-Troller or modern coax
Size - 1.5" x 2.25" x .85" in or 38 mm
x 57 mm x 21.5 mm.
Comes with battery harness with covered fuse
Use this controller with heated liner, pants and gloves, with coax
connector, up to a maximum draw of 15 amps.