Heat-Trollers are true pulse-width modulating
controllers, famous for their high quality and reliability.
not an old-fashioned rheostat. Heat-Trollers cycle current on and off in
seconds, depending on the setting you choose. They do not heat up and
actually reduce amperage draw, on your electrical system, when turned
This new remote controlled Heat-Troller gives
you much more flexibility without sometimes annoying wires.
receiver stays inside your jacket, vest or pants and connects to the
included fused battery harness. You can keep the remote control within
reach anywhere on your bike.
RSHCOAX is a Single Coax controller,
'Single' means you will control your heated gear as one single heat
zone. For instance, gloves are connected to the jacket sleeves and both
jacket and gloves are controlled as one single zone. In order to control
gloves and jacket separately, you need a dual controller (or two
- 'Coax' means it is setup to work with the
round coax plug standard found in pretty much all brands of heated
clothing. Yes, you can use this controller with your heated gear if it
has a coax connector.
SAE, the flat 2 prong plug found on some battery chargers and older
heated gear, is an other widely used connector. We have an adapter
available to use this Coax controller with SAE gear. Use PAC-038 to connect SAE clothing to a Heat-Troller or modern coax
Size Receiver 3.5" x 1.75" x .5"
Size Control 1.9" x 1.3" x .75"
Comes with battery harness with covered fuse
Use this controller with heated liner, pants and gloves, with coax
connector, up to a maximum draw of 15 amps.