Skip to main content

Product Search

Free Shipping over $75 on select products

Product Search

Secure Checkout
My Cart: 0 item(s)

Purchase Item: Back-Off XP Brake & Turn Signal Module
  • SKU: ELBF1004
    Back-Off XP Brake & Turn Signal Module

  • $47.95

    No reviews yet. Write a review!

    This item will earn 47 loyalty reward points.

  • In Stock
  •  

SDC Back-Off XP Brake & Turn Signal Module

# 01004

The BackOFF™ XP Brake Light Module automatically flashes your brake light(s) to capture the attention of following drivers and to make your motorcycle more visible. When installed, the motorcycle's brake light becomes significantly more noticeable because your brake light(s) will flash with your choice of 2 attention getting patterns. This module is designed to work with standard incandescent brake lights, LED brake lights, or a combination of both (up to 10 amps).

  • Universal application for most makes and models of motorcycles
  • Will modulate 1 pair of brake/turn signals
  • Potted with a heat resistant epoxy in an aluminum case
  • Waterproof potting prevents water damage to electrical components
  • Simple 2 wire tap-in installation

See the Specifications tab for more information

Mounting and Installation

To install, wire the BackOFF™ XP Brake Light Module in-line with your existing brake light wire. Locate your brake light wire and cut the wire into 2 (use a test light or multi-meter to find proper wire). Choose the mode you would like from the 2 available and connect the mode wire (red/white or white/red) to the wire leading to the rear of your bike, and connect the red wire from the module to the cut brake light wire leading toward the front of the bike. Tap the black wire from the module to a ground wire and read instructions below for the optional yellow wire. Finally peel the paper lining off of the double sided adhesive pad and mount the module to a clean, flat surface. (Be sure to cap off the unused mode wire)

Specifications

Part Number: 01004
Weight: Less than 1lb
Current Limit: 10 Amp Max per Output (up to 3 Standard Incandescent Bulbs/output)
System Requirement: 12VDC(-) 
Attachment Method: Included Double Sided Adhesive Pad 
Height (in): 5/8"
Length (in): 2 1/4"
Width (in): 1 5/8"
Wire Length: 5"-6"
Material: Anodized Aluminum Case with Heat and Water Resistant Potting
Wire: 16AWG - 20AWG
Color / Finish: Black Anodized
Hardware Included: No
Connectors Included: No
Waterproof: No
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a

What's in the box
(1) BackOFF XP Brake Light Module, (1) Adhesive Mounting Pad

Tools Required: Wire Cutters/Splices

UPC 812823000491

There are no reviews for this item yet.

Write Review:
Back-Off XP Brake & Turn Signal Module
  • Click/Tap a star to rate. 5 stars is the best.
  • All fields are required except "where you're from".
  • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

Thank you for your review!

Enter only the red text:  3Ry2332377Arq!