Warm & Safe Heated Glove liners are a great alternative to full heated gloves. Made from a stretch lycra type material with micro-fiber material woven in for heat distribution. 11 watts of heat per glove, to the back of the hand and around each finger. A standard 2.5mm built-in coax make these heated gloves compatible with almost all brands of heated clothing (almost all use the standard coax connector)
Heated gloves do not come standard with a controller. If you already have a heated jacket with controller, you can connect the gloves to the standard coax connectors on your jacket sleeves. If you do not have heated gear and want to use heated gloves, you need to thread a Y-cord through the sleeves of your riding jacket and connect a controller between the Y-cord and your bike. A special gloves/socks controller with built-in Y-cord is available under related products on the right side of this page.
Click here for the Controller Page
- Simple standard sizing.
- 11 watts of heat per glove
- Standard 2.5mm coax connector
- Thin material for easy fit in regular gloves
How to measure for Gloves: take a tape measure and wrap it around your hand over the knuckles and make a fist. These glove liners stretch. Below chart to give you some idea but normally you can go with whatever size regular gloves you normally wear.
XS: 7" - 18cm
S/M: 8 to 9" - 20 to 23cm
L/XL: 10 to 11" - 25 to 28cm
XXL: 12" - 31cm
Write an online review and share your thoughts with others.