|
You may have reached this page through bookmarked links. Our new Tie Down section on Lockitt.com, with improved navigation, can be found here |
![]() |
![]() |
![]() |
![]() |
![]() |
| Masterlock 2" Tiedowns |
PowerTye 2" Big Daddy Standard | PowerTye 2" Big Daddy Deluxe + Sheepskin SoftTye |
PowerTye 2" Big Daddy Deluxe Trailer Kit |
PowerTye 1.5" Fat Strap Deluxe + Sheepskin SoftTye |
![]() |
![]() |
![]() |
|
Progrip 1" Ratchet Tie down set |
Masterlock 14' x
1" Ratchet Tie Downs |
Progrip 1" Cam Buckle Tie Down set |
![]() |
![]() |
![]() |
| Soft Extensions 1 1/2" x 18" |
Canyon Dancer Barr Harness |
PowerTye Soft Straps + Sheepskin |
![]() |
![]() |
![]() |
![]() |
| Tyre Down Road Bike System | PowerTye E-Track Clips |
Kuryakyn Teardrop Tie-Down Bracket | Kuryakyn Silhouette Tie-Down Bracket |
PowerTye Soft Extensions with Sheepskin |
|
|
|
Canyon Dancer - Barr-Harness™ |
|
|
|
|
A true essential for anyone transporting bikes. |
||||||||
|
|
Tyre Down |
||||
|
Road Bike motorcycle tie downs are rated to 350kg - 770Lbs per side.
That's a whopping 700kg - 1540Lbs of motorcycle tie down grunt. Keep in
mind, this has not much to do with the weight of your bike, only with
the force needed to keep it upright. Your bike won't move ever when fitted correctly. It doesn't put any unnecessary wear and tear on your bikes suspension or risk in damaging the fairing by scratching it. This motorcycle tie down system uses existing technology in an innovative way. This is the original and genuine motorcycle tie down system, Tyre Down comes complete with 1" ratchet tie downs. Use this system in combination with a Bar-Harness or second set of tie-downs, in the front, for optimal security.
Ratchet rated to 350Kg or 771lb |
|||
|
Measure the distance from the most forward part of the front tyre to a
point just forward of the rear axle. The front wheel should be
positioned so that the bike cannot roll forward and the bike's steering
cannot turn. It is also recommended that a tie of some form be fitted to
prevent the front wheel from bouncing vertically and/or horizontally
during transport.
Anchor points must be fixed securely to a strong base 750mm to 900mm apart (30 inches to 36 inches) and approximately 50mm (2 inches) forward of the rear wheel axle. The rear wheel should be positioned mid way between the anchor points. Place the Tyre Down cradle over the rear tire with the axle centered. (Road Tyre Down shown below) Remove any slack from the strapping before tightening with the ratchets. Refer to the tag on the ratchet straps for more information. The entire job takes less than a minute. |
||||
|
||||
![]() To check that Tyre Down will fit your bike drape a length of string or rope over your rear tyre with each end of the rope held to the proposed fixing points 750mm to 900mm apart. If there is no interference with any part of your bike the Tyre Down™ will fit. See illustration above. |
||||
| Warning: Improper fitting or use of Tyre Down may result in the motorcycle not being properly secured | ||||
PROGRIP Cam buckle Tie Down SET
|
| Our best value Tie Down. At this price you can't afford not to have new tie-downs for your bike. The J-hook instead of regular S hooks is a nice feature. |
1" PROGRIP Ratchet Tie Down SET |
|
|
|
2" x 6 FT (1.8m) Masterlock Spring Clamp Tie Downs |
|
|
|
Masterlock Ratchet Tie Downs with Strap Trap™
|
|
|
|
Powertye Big Daddy Standard
|
|
|
|
| This is the "Strongest Motorcycle Tie-Down in the world" If you want the "Best and Highest Quality" this is it. The Ultimate tie-down for transporting your motorcycle |
Powertye Fat Strap Deluxe
|
|||
|
Made in USA |
||
| Now with 2 secure hooks and a soft tye. This new design was developed to give you greater piece of mind. The secure hooks attach to your trailer and to your bike, plus a built in soft tye so that the unit is all in one with maximum protection. Our design will not come unhooked when trailering your bike over rough roads causing costly damage. |
|
Powertye Big Daddy Deluxe 2" Ratchet tie downs with Genuine Sheep Skin |
|||
|
Made in USA |
||
| Now with 2 secure hooks and a soft tye. This new design was developed to give you greater piece of mind. The secure hooks attach to your trailer and to your bike, plus a built in soft tye so that the unit is all in one with maximum protection. Our design will not come unhooked when trailering your bike over rough roads causing costly damage. |
|
Trailer Kit Powertye Big Daddy 2" Ratchet tie downs |
|||
|
Big Daddy Trailer Kit
consists of Made in USA |
||
| One secure hook and one 3/8" S-hook on each tie down. A convenient free carry bag is included. |
|
Trailer Kit Powertye Big Daddy Deluxe 2" Ratchet tie downs with Genuine Sheep Skin |
|||
|
Deluxe Trailer Kit consists of Made in USA |
||
| Now with 2 secure hooks and a soft tye. This new design was developed to give you greater piece of mind. The secure hooks attach to your trailer and to your bike, plus a built in soft tye so that the unit is all in one with maximum protection. Our design will not come unhooked when trailering your bike over rough roads causing costly damage. |
|
Kuryakyn Tie Down Brackets for Electra Glide or RoadKing |
||||||
|
|
|||||
PowerTye 2" Big Daddy E-Track Clips (4 pack) |
|
|
A set of 4 PowerTye E-Track 2" Big Daddy Clips.
(E-Track shown in picture is only illustrative)
|