Heated Grips for
Motorcycle, Scooter
& ATV

Sport & Touring Grips

Cruiser & Custom Grips

Oxford Sport Heaterz
Heated Grips OF696
for 7/8" bars
Oxford ATV Heaterz
Heated Grips OF768
Oxford Touring Heaterz
Heated Grips
OF693 for 7/8"
Heat Demons for
Harley & Metric Bikes

MADE IN USA
7/8" and 1"
Hot Grips Brand
1" Oxford Heated Grips
Harley and Metric Cruisers
Under Grip Warmers HotHands
Wrap around grips
A great alternative, or to be used in conjunction with Heated Grips, are Handlebar Handwarmers. Check out our Muffs

Following information might help you choose between the less expensive Oxford Heaterz , US made Hot Grips© or other heating solutions like Symtec's Heat Demons under grip or in-bar heating elements.

Hot Grips© is the original heated grip and 100% MADE IN USA*. Installation requires a little more work as they do not come pre-configured with quick release connectors. However, installation can be done more proffesional, quality is top notch and due to their special inner design, heat loss through the handlebar is much less than any other heated grip brand. Hot Grips© heat is distributed evenly and all around the grip and they are Guaranteed Never To Burn Out. No hot and cold spots with Hot Grips.
Hot Grips© are available in open or closed (end) version, for 7/8" or 1" diameter handlebars and 3 different grip lengths.

A genuine Heat-Troller electronic pulse-width modulating controller, instead of the standard hi/lo/off switch, is optionally available at a great bundled price with purchase of a new set Hot Grips©. If quality is your thing and you want the best bang for your buck, go with the original.

Oxford Heaterz Heated Grips and Hot Hands, although China made, maintain a very high quality for a super price.  Install is a breeze with all the connectors pre configured. Connect the battery lead to the bike's battery. Connect the switch or controller to the grips and enjoy. It truly is a plug & play setup. Oxford Heaterz are available for 7/8" (Original & Sport), 1" (Custom) handlebars and ATV's.
Spare parts are available from our Grip Parts page. All Oxford Heaterz (Original, Sport or Custom) come pre-configured with the electronic controller and all materials in the box. HotHands with a on/off switch only. The difference between Original and Sport grips is only look & feel.

If you experience problems with the Oxford Heated Grips or controller, check out this Q&A page

SYMTEC Under grip hand warmers are a great and low cost alternative if you want or need to use your stock or aftermarket grips. There is more heat loss through the handlebars but, there is still sufficient heat reaching the outside grips.
Symtec Heat Demons are heating elements inserted inside the hollow handlebar. They come with a fabulous OEM looking controller. There is a version for Harley and one for Metric bikes.

* Not to be confused with Oxford heated grips sold as Hot Grips in Europe.


Why use Heated Grips instead of Heated Gloves?
Heated grips have the advantage to be always available. Imagine you are riding home on a cold spring/fall night, just flip the switch and ride in comfort. 
Heated gloves have the advantage to heat your hands on the outside, where it matters more, under extreme low temperatures. The problem is that, most likely, you will not be riding with heated gloves before it gets really cold. From a heat supply viewpoint, heated gloves are better than heated grips. It is also a common misconception that you would have wires dangling from your gloves. The wires always come through your jacket sleeves straight into the gloves. A great combination with heated grips are Oxford Muff hand warmers.


How to measure tube diameter?

If you don't have access to measuring Calipers, here's an easy way to find out.

Take a strip of paper and wrap it around the handlebar, frame or any tube you need to measure (on a straight portion). Mark the paper where it overlaps. Place the paper on a flat surface and measure from the end to the mark.

Tube Diameter Flat Distance
7/8" or 22mm 2 3/4" or 70mm
1" or 25.4mm 3 1/8" or 80mm
1 1/4" or 31.75mm 4" or 100mm

Electronic controllers and all Heated Grip spare parts are available here

Symtec Grips controller  Fuse  inline fuse holder  Relay 

OXFORD Hot Hands

  • Easy wrap-around application
  • Nylon outside and neoprene anti-slip inside
  • Fits all sport and tour-bike grips
    (SEE Measurement below)
  • Complete with on-off switch, green led, wiring and quick connectors
  • Only 1.3 amp draw
  • Color: Black

Free Oxford Comfy Neck-tube included

Online store

Now available with optional Powerlet / BMW
accessory outlet connector.

A true essential for those who ride year round.
Hot Hands can be mounted and removed in a few seconds for those cold morning and evenings. Keep in mind that you are adding material to your grips and for some people (real small hands) this might feel uncomfortable.

How do I know this will fit my grips?
Hot Hands will fit all standard grips. If you think your grips are fatter (most cruiser bikes are) then do this. Wrap a strip of paper around your grips and mark where it touches. Lay flat and measure length. Hot Hands measured flat are about 6" (155mm) long including a 1" (25mm)  hook&loop fastener strip. If your paper strip measures more than 5" you will have trouble closing the Hot Hands. 5" or below means you are good to go.


NEW Oxford 7/8"SPORT HEATERZ
Heated Grips OF696Z

  • Simple fit to practically all  motorcycles with 7/8" (22mm) bars
  • Average 3.6amps drain per pair (up to 2.0amps each)
  • Durable molded wiring
  • 1-piece molded construction.
  • New Advanced Heat Controller with separate on/off switch and auto shut-off
  • Mounting bracket for controller included.
  • Great Price and 1 Years warranty

This is Oxford's latest addition to it's heated grips line-up. OF696 Sport Heated grips have a different feel than regular Oxford 7/8" heaters. Where the OF699 is a much softer all-round heated grip, for sport and tour bikes, the knurled profile on the OF696 Sport Heaterz provides a better grip. The feel is harder.
Total length is 123mm but there is provided groove to cut the grips shorter. Outside diameter is the same as OF699 Heaterz, about 34mm. Ends are open.


Oxford 7/8"HEATERZ Heated Grips OF693
For Sport and Tour Bikes

  • Simple fit to practically all  motorcycles with 7/8" (22mm) bars
  • Minimal battery drain, up to 2 amps each grip
  • Balanced heat design made from durable yet comfortable TPR rubber
  • Moulded wiring arrangement is both durable and discreet.
  • New waterproof and vibration resistant Electronic heat controller. Version 7
  • Great Price and 1 Year warranty

OF693Z replaces OF699.
Same grips, new version 7 controller

Online store
 

NOW with new Electronic Controller

Heaterz heated grips are a great solution for cold hands. These durable TPR rubber grips replace your stock grips and have heating elements molded right inside. More heat on your hands and less lost to your handlebars. A waterproof and vibration-resistant heat controller, with LED indicator, is included and can be mounted on the handlebar or fairing. 2 amps (per grips) draw at full power. Warning: These grips can reach up to 131 degrees F! Use protective motorcycle gloves.
Will fit all 7/8" (22mm) handlebars.  These grips are 4 3/4" with open ends


NEW Oxford 7/8"ATV HEATERZ
Heated Grips OF768Z

  • Simple fit to practically any ATV with thumb throttle (both grips are for 7/8" - 22mm bars)
  • Average 3.6amps drain per pair (up to 2.0 amps each)
  • Durable molded wiring
  • 1-piece molded construction.
  • New Advanced Heat Controller with separate on/off switch and auto shut-off
  • Mounting bracket for controller included.
  • Great Price and 1 year warranty
     

Oxford ATV heated grips have a great soft feel and are easy to install. The package comes with everything you need although we do recommend you purchase the extra 2 component PowerPoxy. The all-new temperature control makes them very easy to use too. Just dial in the heat setting and enjoy the ride. The drain on your electrical system is minimal (up to 4amps total) and the controller has a bright reminder light. It also has a built-in shut off to protect your battery in case you forget to turn the heated grips off.


Oxford 1" CUSTOM HEATERZ
 Heated Grips for Harley and Metric Cruisers

  • For all 1" (25mm) bar custom bikes
  • Minimal battery drain, up to 2.1 amps each grip
  • Double bonded durable rubber material and removable chrome end-caps
  • New waterproof and vibration resistant heat controller - NOW CHROME
  • 135 mm length for universal fit*
  • Kit comes complete with all wiring, glue and FREE comfy Neck Tube.
  • Great Price and 2 Years warranty
Installation is a snap. The included on/off variable controller a must have. Everything you need to install these heated grips is included in the package.
 

Measurements
5 5/16" - 135mm long
1 19/32" - 40mm outside circumference
 

Online store
 

Custom Heaterz heated grips are a great solution for cold hands. These durable TPR rubber grips replace your stock grips and have heating elements molded right inside. More heat on your hands and less lost to your handlebars. A waterproof and vibration-resistant heat controller, with LED indicator, is included and can be mounted on the handlebar or fairing. 2 amps (per grips) draw at full power. Warning: These grips can reach up to 131 degrees F! Use protective motorcycle gloves. Will fit most 1" handlebars.

* A replacement throttle slider is required for Harley Davidson. You will be offered one in the shopping cart.
 A special Honda adaptor tube, for narrower Honda throttle sliders, is supplied in the package.


Hot Grips for 1" Bars

For Harley Davidson
and all other Cruisers


  • Will fit all 1" bars
  • Complete with 3- position switch (high and low) and all wiring. (Variable Heat-Troller optional)
  • Consumption only 7 watts (0.58 amps) on low and 16 watts (1.33 amps) on high, per grip
  • Switch housing box available at reduced price if purchased with grips.
  • Grip length 4 3/4" (120mm) or 5 1/4" (133mm)
  • Available closed, open or Chromed ends
  • Heat-Troller upgrade available with grips
  • Hot Grips Original MADE in USA
  • Guaranteed not to burn out
 

A complete set replacement heated grips with all the necessary wiring, switch and installation instructions. Hot Grips for Harley Davidson®, are very close, in look and feel, to stock grips. You will wonder how you did so long without. On those chilly morning or evenings, flip the switch and get  comfortably warm. Added benefit is that you can uses lightweight gloves for much longer.

Click here for installation instructions

Click here for a complete bike model list

Hot Grips 7/8" Bars

For all sport and tour bikes


  • Will fit all 7/8" bars
  • Complete with 3- position switch (high and low) and all wiring.
  • Consumption only 7 watts (0.58 amps) on low and 16 watts (1.33 amps) on high, per grip
  • Available closed, open or Chromed ends
  • Switch housing box available at reduced price if purchased with grips.
  • Grip length 4 3/4" (120mm), 5 1/4" (133mm) or 5 3/4" 145mm and open or closed ends.
  • Heat-Troller upgrade available with grips
  • Hot Grips Original MADE in USA
  • Guaranteed not to burn out
 
Click here for a complete bike model list

Symtec Under Grip Heaters


Optional Heat-Troller available

Complete Motorcycle Hand Warmer Kit w/ Round Rocker Switch
 



  • Round rocker switch included
  • 2 stage (high - low) settings
  • Universal fit on all type handlebars
  • Use your own favorite grips
  • Adjusted left and right (throttle) side heat output
  • Only 3 amps draw on maximum setting
  • No external resistor or other parts needed

 

Click here for installation instructions


Symtec Heat Demons Universal & Harley
In-Bar & Under-Grip Warmers with Controller

Heat Demons Grip Warmers

Heat your grips for those cool riding days. With 4 levels of heat and built in thermister, this smart system allows you to set and keep your desired temperature. The controller and switch is built right into the clutch perch clamp with L.E.D. indicators that dim for night riding. Installation works with any grip and includes everything you need for proper installation. Ride on with warm hands and use your favorite grips after you install your Heat Demons.

Harley model fits: '82-'10 H-D Models with 1" handlebars (except '08-'10 Touring Models and Trikes with electronic throttle or any models with air reservoir handlebars)

Metric model fits: All bikes with 7/8" or 1" handlebar. Handlebars need to be hollow from one side to the other.
If you have handlebar inserts or use bar-end weights, we have undergrip wrap style available with controller.
 

  • Heaters that install inside the handlebar allowing for use of original or your favorite Grips.
  • Custom Controller with 4 Levels of Heat.
  • Fast Warm-Up
  • East to Install.
  • Controller available in Black or Chrome
  • Attractive Weatherproof Design.
  • 4 Color LED Lights indicate the Heat Level Selected. (Dims for Night Riding)
  • Thermister feedback keeps the Grip Heat at the selected level regardless of the Voltage Variation or Ambient Conditions.
  • Very Affordable. Makes sense to install and all Bikes.
  • Increases riding safety and comfort.
  • Can also be installed on 1" Aluminum Handlebars
  • Metric Models also available for most other Bikes.

 

Universal Harley Davidson
Online store Online store

OXFORD MUFFS Handwarmers OF82

  • Special 3D design for best clearance of vital control gear
  • Pre-formed opening for ease of access to controls.
  • Total weather protection: - 100% waterproof heavy duty 1500 denier polyester material - 100% windproof construction - 100% Thermacel insulation for total warmth
  • High visibility 3M reflective piping for increased visibility to other road users
  • Independently safety tested
Oxford OF82 Muff Handwarmers are ideal for those riders who don't want to install heated grips or use heated gloves. Actually, in combination with heated grips, you can ride with thin summer gloves at any below freezing temperature. With total wind and rain protection, you can use your favorite fitting gloves and still enjoy warm hands.

Perhaps your ride may not look as cool with these puppies on but believe us, you really don't look all that good when you are frozen stiff. Not to mention the safety aspect ..


Handlebar Switch Housing
for 7/8" and 1" handlebars

Hot Grips Switch Housing 

Will fit all standard
Hot Grips toggle switches.

  • Injection molded made in USA
  • Fits both 7/8" and 1" handle bars
  • All stainless steel hardware
  • Allen key included

Order this optional switch housing if you are not planning on installing your Hot Grips switch inside a fairing. Only for Hot Grips brand or other small toggle switches

Housing without switch
 
Copyright © 1999 -2012 [LockItt Group]. All rights reserved.