SDC Back-Off XP Brake & Turn Signal Module
The BackOFF™ XP Brake Light Module automatically flashes your brake light(s) to capture the attention of following drivers and to make your motorcycle more visible. When installed, the motorcycle's brake light becomes significantly more noticeable because your brake light(s) will flash with your choice of 2 attention getting patterns. This module is designed to work with standard incandescent brake lights, LED brake lights, or a combination of both (up to 10 amps).
- Universal application for most makes and models of motorcycles
- Will modulate 1 pair of brake/turn signals
- Potted with a heat resistant epoxy in an aluminum case
- Waterproof potting prevents water damage to electrical components
- Simple 2 wire tap-in installation
See the Specifications tab for more information
Mounting and Installation
To install, wire the BackOFF™ XP Brake Light Module in-line with your existing brake light wire. Locate your brake light wire and cut the wire into 2 (use a test light or multi-meter to find proper wire). Choose the mode you would like from the 2 available and connect the mode wire (red/white or white/red) to the wire leading to the rear of your bike, and connect the red wire from the module to the cut brake light wire leading toward the front of the bike. Tap the black wire from the module to a ground wire and read instructions below for the optional yellow wire. Finally peel the paper lining off of the double sided adhesive pad and mount the module to a clean, flat surface. (Be sure to cap off the unused mode wire)
Part Number: 01004
Weight: Less than 1lb
Current Limit: 10 Amp Max per Output (up to 3 Standard Incandescent Bulbs/output)
System Requirement: 12VDC(-)
Attachment Method: Included Double Sided Adhesive Pad
Height (in): 5/8"
Length (in): 2 1/4"
Width (in): 1 5/8"
Wire Length: 5"-6"
Material: Anodized Aluminum Case with Heat and Water Resistant Potting
Wire: 16AWG - 20AWG
Color / Finish: Black Anodized
Hardware Included: No
Connectors Included: No
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a
What's in the box
(1) BackOFF XP Brake Light Module, (1) Adhesive Mounting Pad
Tools Required: Wire Cutters/Splices