ABUS WBA100 Floor Anchor
Strength combined with good design. A massive 5/8" (16mm) hardened special steel shackle, anti corrosion treated and hinge-mounted on a steel plate. The anchor is then covered with a strong and durable plastic shell. The shackle folds flat inside the shell making it possible to drive over it.
Installation is simple. Drill 4x 5/8" holes*, drop the supplied anchor bolts in, mount the anchor plate and cap the Allen bolts off with the supplied ball bearings. Attach the cover and that's it .... you have installed a secure anchor point.
WBA100 shackle is large enough to attach multiple chains or locks.
Included is one anchor assembly with cover, 4 expansion bolts with cap-off steel balls. Drill bit is not included.
- 16mm hardened steel shackle
- 4 expansion bolts
- Large enough to use multiple chains
- Convenient 'drive-over' design
- Made in Germany
* Proper steps to install any multi-bolt anchor:
Always mark and drill each hole after re-positioning the anchor. Drill first hole, position anchor with one bolt temporarily, mark second hole, drill and position. Repeat until all 4 holes are drilled. Chances are, if you mark and drill all 4 holes at ones, one or more drilled holes will be off.