Warm & Safe (First Gear) remote heated garment controller.
Heat-Trollers are true pulse-width modulating controllers, famous for their high
quality and reliability.
This is not an old-fashioned rheostat. Heat-Trollers
cycle current on and off in seconds, depending on the setting you choose. They do
not heat up and actually reduce amperage draw, on your electrical system, when turned
dow
This new remote controlled Heat-Troller gives you much
more flexibility without sometimes annoying wires.
The receiver stays inside
your jacket, vest or pants and connects to the included fused battery harness. You
can keep the remote control within reach anywhere on your bike.
RSHCOAX is a Single Coax controller,
- 'Single'
means you will control your heated gear as one single heat zone. For instance, gloves
are connected to the jacket sleeves and both jacket and gloves are controlled as
one single zone. In order to control gloves and jacket separately, you need a dual
controller (or two separate controllers).
- 'Coax' means it is
setup to work with the round coax plug standard found in pretty much all brands
of heated clothing. Yes, you can use this controller with your heated gear if it
has a coax connector.
SAE, the flat 2 prong plug found on some battery chargers and older heated gear, is an other widely used connector. We have an adapter available to use this Coax controller with SAE gear. Use PAC-038 to connect SAE clothing to a Heat-Troller or modern coax heated gloves.
Technical Specifications:
Size Receiver 3.5" x 1.75" x .5"
Size Control 1.9" x 1.3" x .75"
Comes with battery harness with
covered fuse holder.
Use this controller with heated liner, pants and gloves,
with coax connector, up to a maximum draw of 15 amps.
