Lockitt PL770 Hasp for Puck Style Padlocks
# HPPL7705
Accepts our US made PLLK5011 Flat Back puck lock (NOT INCLUDED) which optionally can be permanently mounted on one side of the hasp. Meaning, the lock stays on the hasp when the door is opened. Many other brand puck locks will fit as well but can not be fixed to the hasp.
Constructed from a solid 5mm steel plate with welded 6mm thick raised walls and hidden mounting bolt openings which are protected by a puck lock in place.
This type hasp is widely used on flat closing double rear or side delivery van-doors and completely protects the puck lock inside from brute force attacks. Can be mounted on right or left opening doors (upside down on left opening door).
Where other brand hasps have all mounting bolts exposed, our PL770 has 2 hidden mounting bolts placed under the lock.
Additional extra thick steel mounting plates are available (not included) to reinforce the doors on the inside. This is recommended when the hasp is mounted on plywood trailer doors. For most applications, using large washers on the inside is more than sufficient.
PL770 puck hasp is mounted with 6 carriage bolts and 2 extra countersunk 5/16" bolts hidden under the lock.
Due to specific lengths needed for any given install, carriage bolt hardware is not included but can be found easily at any hardware store.
Dimensions.
Each Side: 114mm x 114mm - 4.5" x 4.5"
Base Steel Gauge: 5mm - 0..20"
Raised Walls Gauge: 6mm - 0.235"
Specs:
Number of mounting points: 8 (2 hidden)
Mounting hardware included: No
Powder coated: Yes
Number of puck attachment points: 2
Puck attachment screws included: Yes (2)
