SMCOAX Single Bike Mounted Heat-Troller - Controller for heated gear.
Warm & Safe Heat-Trollers are true pulse-width modulating controllers, famous
for their high quality and reliability.
This is not an old-fashioned rheostat. Heat-Trollers cycle current on and off in seconds, depending on the setting you choose. They do not heat up and actually reduce amperage draw, on your electrical system, when turned down.
SMCOAX stands for Single Mounted Coax controller,
- 'Single' means you will control your heated gear as one single heat zone. For instance, gloves are connected to the jacket sleeves and both jacket and gloves are controlled as one single zone. In order to control gloves and jacket separately, you need a dual controller (or two separate controllers).
- 'Mounted' meaning it is designed to be permanently mounted on your bike. The control knob and LED can be positioned anywhere on your bike. A small hole needs to be drilled in a panel of your choosing.
- 'Coax' means it is setup to work with the round coax plug standard found in pretty much all brands of heated clothing. Yes, you can use this controller with your heated gear if it has a coax connector.
SAE, the flat 2 prong plug found on some battery chargers and older heated gear, is an other widely used connector. We have an adapter available to use this Coax controller with SAE gear. Use PAC-038 to connect SAE clothing to a Heat-Troller or modern coax heated gloves
Size - 1.5" x 2.25" x .85" in or 38 mm x 57 mm x 21.5 mm.
Comes with battery harness with covered fuse holder.
Use this controller with heated liner, pants and gloves, with coax connector, up to a maximum draw of 15 amps.
Write an online review and share your thoughts with others.