Squire SS65CS Stronghold
Solid Steel high guard padlock fitted with R1 cylinder.
Made in UK, this was at some time Henry Squire's flagship Padlock
Machined from a solid block of steel, heat treated and fitted with hardened Boron steel shackle. This lock is a perfect match for our Pragmasis Anti-Pinch Pin chain lockup solutions.
Squire padlocks are available in different configurations and price levels. Not all Squire locks are made equal.
We load our Squire SS65CS locks with the highest grade restricted 6 pin-tumbler R1 cylinder with anti pick and bump technology.
Important: The standard Squire SS65CS does NOT fit our 19mm Pragmasis Protector chains. If you intend to use this lock with a 19mm chain, look for the XLN version in the drop menu. Standard version is a perfect fit for our 16mm Protector chains and Anti Pinch Pins.
- Solid hardened steel lock body
- Hardened boron alloy steel shackle
- Two levels of coating with zinc plating and black electrophoretic for double corrosion resistance in and outside the lock.
- Tested over 200 hours salt spray
- Rekeyable 6 pin tumbler with 250.000 differs.
Body width: 65mm - 2.55in
Body thickness: 31.8mm - 1.25in
Body height: 82mm - 3.22in
Shackle thickness: 12.7mm - 0.5in
Vertical clearance: 19mm - 0.74in
Horizontal clearance: 19mm - 0.74in
Standard R1 Keyed different gives you the standard lock but fitted with the R1 cylinder, 2 unique keys and a code card.
If you want multiple locks keyed the same, choose the Standard R1 Keyed Alike option. Each lock will come with 2 keys, all keys for all locks are the same. Shipping delay possible.
XLN version is for Protector 19mm chains.